Welcome To D.P.Silicones

H.V.G. Compound  is a stiff non-melting grease like Silicone Material. It maintains its consistency over a wide temperature   range  of – 40o C to  250o C.  Its  low volatility, very low vapor pressure of the base, chemical  resistance,  relatively  constant  consistency  over a  wide  temperature  range  sealing ability, make  it  an  ideal  sealant  for  high  vacuum and high  pressure systems and sealant-cum-lubricant for chemical processing equipment.

Applications :

  As a sealant  and lubricant for glass-ints and stop-cocks in high vacuum and high temperature systems as well as in ordinary systems.  

  In pressure lubricated plug valves, control valves and ceramic plug cocks.

  In valves of water – softener.

  In fire extinguishers to keep the  valves  dependably  operable  for  long  period  despite severe temperature conditions and corrosive atmosphere.  

  As a sealant on floating telephone batteries.

  Its high tack may be taken advantage  of, in holding rubber and other parts in position during assembly of certain parts.

  As a release agent for epoxy, polystyrene, polyvinyl chloride, polyester resins and other plastics. Normally  it  is used only  when  common release agents including  other silicone release agent fail.

Typical Properties :

Colour… Translucent, Consistency-  Penetrometer, unworked – 180    - 210,  Bleed,  Percent maximum 24 hours at 200o C …..0.5: Evaporation, percent maximum 24 Hrs. at 200o C…..2.0 Apparent Density, gms /c.c ….1.0 solidification point, below… - 40o C,  Melting point…..None.

Chemical Resistance:

HVG  has  been  found to  be  resistant  to  dilute aqueous acids,  alkalis and other inorganic Salt solutions. It is unaffected by most vegetable and mineral oils. Many organic compounds and common gases.

Solubility:

H.V.G.  Compound  is  not  soluble  in  water,  methyle  alcohol,  ethyl alcohol,  acetone glycol and glycerine.   However   it can  be dispersed  in kerosene,  benzene,  toluene  ethyl  ether,   carbon tetrachloride,  petroleum ether, methylene chloride or perchloroethylene.

Note: The information presented here is based on our present state of knowledge which we believe to reliance but we cannot accept any responsibility for operation not under our direct control. It is offered solely for your consideration, innovation and verification.

PACKING : 1 Kg , 5 Kg, & 30 Kg Jar.

High Vacuum Grease-10 Silicone Grease-20 Silicone Grease-30 Silicone Mould Release Compound (H.V.G.-40)  Dielectric Sealant cum Lubricant (H.V.G.-50)
Petroleum Jelly  Heat Sink Compound   Anti-Seize Compound (Moly Based) (A.S.C.-50)  Damping Compound  Silicone Defoamer / Anti Foaming Agent
Non Silicone Defoamer  Amino Oil Emulsifier Silicone Emulsion  Teflon Grease (P.T.F.E.)   Ink Follower
Chain Oil  (High Temperature) Petrovis Polybutenes Simethicone 100% (Activated Oil)  Heavy Liquid Paraffin High Speed Bearing Grease (H.S.B.G.-100)
 Moly Grease (Multi Purpose-M.M.G.-100)  Graphite Grease (M.G.G.- 300)  Gel Grease For Gel Refills Multi Purpose    M.P.& A.P.Grease Light Liquid Paraffin
 Silicone 84 Grease/ L.V.G. Sewing Thread Lubricant Copper Grease  Micro Amino Silicone Amino Silicone Emulsion
Emulsifier 9.5 Mole (Alphox - 200) Emulsifier 4.5 Mole (Alphox - 100) Silicone Fluid/Oil  (ALL C.T.S.K.)  Damping/Hinges/  Mechanism Grease    


About us | Our Products | Feedback | Contact us