Non Silicone Defoamer is an
Antifoaming Agent for Jet, Overflow Jet & High Temperature Processing.
Technical Information
:
Appearance
: White Semi Solid Liquid.
Ionic Nature
: Non Ionic
pH
: Weakly Acidic to Neutral
Defoaming Timing
: 10 to 15 Seconds
Applications :
Non Silicone Defoamer must be diluted with Cold Water in the Ratio 2 : 10. Stock Solution need to be stirred before use.
Non Silicone Defoamer is used as a Foam Preventation. It can be used to Suppress the Foam already present in the water.
The Product can be used in all Types of Machinery, although it's strong point is for the use in Jet & High Temperature
Equipment.
The Diluted Product can be added directly to the water. The Application Quantities depend on the composition of the Treatment both Temperature & Type
of the Equipment. However, in General 2 to 4 GMS/LIT of Non Silicone Defoamer is Recommended.
Note: The information presented here is based on our present state of knowledge which we believe to reliance
but we cannot accept any responsibility for operation not under our direct control.
It is offered solely for your consideration, innovation and verification.
PACKING
:
30 Kg & 50 Kg PLastic Jar.
